VIHgDiCCY0Y" The following phase in establishing the SKR V1.4 with Marlin 2 covers the Configuration.h documents. Having a look at pertinent setups for the SKR V1.4 and also Turbo boards. p tr SKR V1.4 Marlin 2 Configuration Overview tr Software application td Allow's Start td PLATFORMIO.INI tr CONFIGURATION.H tr CONFIGURATION_ADV. H td pins_BTT_SKR_V1_4. h td tr p table CONFIGURATION.H td Serial Port BAUDRATE tr td MOTHERBOARD tr DEFAULT_NOMINAL_FILAMENT_DIA Thermistors td PID tr ENDSTOPPULLUPS td tr ENDSTOPPULLDOWNS td Stepper Drivers td DEFAULT_AXIS_STEPS_PER_UNIT td Probes td BLTouch or Probe? tr NOZZLE_TO_PROBE_OFFSET Invert Stepper Instructions td 3D Printer Capacities td tr Software Application End Quits td AUTO_BED_LEVELING tr EEPROM_SETTINGS td tr LCD td SD Assistance td tr Establishing the LCD Controller tr NEOPIXEL_LED td tr Configuration.h h2 default-axis-steps-per-unit div style="text-align: center" div div div style="text-align: center" imager_9_18772_700.jpg" alt="*" div style="text-align: center" imager_10_18772_700.jpg" alt="*" div imager_12_18772_700.jpg" alt="*" div 2020 p In addition within Marlin 2 there is an area for software program minimum end quits. For example allows state the elevation for the Z-Axis is 0mm, it would certainly quit at 0mm as well as not go any kind of reduced. Since this is specified in Z_MIN_POS as 0. Nonetheless when bed levelling this triggers a concern where the probe or nozzle can not be decreased sufficient. Normally we intend to disable this, so look for the MIN_SOFTWARE_ENDSTOPS alternative. In addition disable the alternative for the MIN_SOFTWARE_ENDSTOP_Z, See listed below for an instance. p #define MIN_SOFTWARE_ENDSTOPS #if Allowed(MIN_SOFTWARE_ENDSTOPS)#define MIN_SOFTWARE_ENDSTOP_X #define MIN_SOFTWARE_ENDSTOP_Y solid// #define MIN_SOFTWARE_ENDSTOP_Z #endif p If you have not currently do not neglect to conserve your changes.Mac-- Press the CMD (⌘) and also the S secret at the exact same time.PC-- Press the Ctrl as well as the S secret at the exact same time.