Post|Setup| discovered this useful|Produced: |Changed: articleFormattedModifiedDate

On a target organized on a VMWare Hypervisor and also running Provisioning Solutions Target Tool Software application 6.0 and also later on, the target tool can not attach to digital disk when beginning it from the regional disk drive. A red 'X' shows up on the online disk standing symbol in the system tray.

In Case Audience, the complying with message shows up: Occasion ID 7026The complying with boot-start or system-start chauffeur(s) stopped working to tons: bnistack

To settle this concern, finish the complying with actions on the Picture that is held on the VMWare Hypervisor:

Uninstall the Provisioning Solutions target gadget software program from the digital equipment as well as reboot.

Click Beginning > Run.

Kind cmd as well as click OKAY to open up a command punctual.

Run the complying with command: established devmgr_show_nonpresent_devices=1

Run the complying with command from the exact same command motivate home window to open up the Tool Supervisor: devmgmt.msc

Click Sight > Program surprise gadgets.

Broaden the Network adapter node. Situate the non-active symbols, which show extra gadget vehicle drivers.

Right-click the non-active symbol as well as click Uninstall for every symbol to eliminate the extra gadget motorists.

If triggered, reactivate the online maker.

Re-install the Provisioning Web server target gadget software program as well as reboot. You must currently have the ability to attach to the online disk.

Keep in mind : Do not get rid of ghost Network User interface Cards (NICs) on XenServer target tool VMs.

Trouble Reason

When mounting the Provisioning Solutions target gadget software program on the master photo you are utilizing to develop the vDisk, several ghost NICs exist in Tool Supervisor. The target tool software program is binding to among the ghost NICs.

You can check out the ghost NICs in the Gadget Supervisor, as displayed in the adhering to display shot:


Extra Resources

Exactly how to Repair a Target Gadget not Starting right into a vDiskDeploying Windows 2008 R2 and also Windows 7 design templates with vmxnet3 relabels the NIC as # 2
Was this web page valuable? Thanks! Sorry to listen to that. Please offer responses.
comments You ranked this web page as You ranked this web page as
Please offer post responses Do not hesitate to provide us extra responses! What can we do to enhance this web page?
Remark area is called for
Call is called for
Email address is needed
Please confirm reCAPTCHA as well as press "Send" switch
Close Submit

Included Products

Stopped working to fill highlighted items web content, Please attempt once more.


Required even more aid?

Item concerns
Open up or see instances Conversation live

0"> Go
Various other alternatives Item Paperwork Discussions Sight numbers
Share this web page

Personal Privacy & TermsCookie Preferences